Tankless Water Heater

Tankless Water Heater Services in Orlando, FL

Tankless water heaters provide significant energy savings over standard water heaters. If you are looking for a way to save energy on your Orlando home, or Adding a Tankless to your Business and it’s time for a new water heater, you may want to make the switch. All Cool Heat Plumbing & General Contractor Inc provides a complete array of services for tankless water heaters, including repair, maintenance, and installation, so you can enjoy these benefits and have confidence that your system will serve you well. You benefit from our friendly team and our iron-clad, worry-free guarantee with each of these services. You have nothing to lose but the high energy bills when you partner with All Cool Heat Plumbing & General Contractor Inc for your tankless water heater needs.

Learn why we’re the area’s top choice for tankless water heater services. Call the experts at a813-915-6772 or contact us online for tankless water heater installation, replacement, repair, or maintenance today!

The Benefits of a Tankless Water Heater

A tankless water heater is a bit more expensive than a conventional model initially, but it has several great benefits that often make it worth the cost, including:

Nearly unlimited hot water: Unlike standard water heaters, which are limited to a fixed size, tankless water heaters can provide almost endless hot water when sized and installed correctly.

Reduced energy usage: Tankless water heaters use up to 34% less energy than standard models, according to the U.S. Department of Energy, resulting in significant savings over the system’s life.

Long service life: Tankless water heaters often last longer than 20 to 25 years — about twice as long as conventional models.

Smaller installation footprint: With their small size, tankless water heaters can fit in many places where a tank water heater cannot.

Contact our plumbing experts by calling at: (407)461-0301 today to learn if a tankless water heater is the right choice for your Orlando home or Business!

Our Tankless Water Heater Services in Orlando Florida

At All Cool Heat Plumbing & General Contractor Inc, we service gas, electric, and tankless water heaters. Our plumbers offer all the services you need for your tankless water heater, including:

Tankless water heater maintenance: Routine maintenance can help to keep your tankless water heater efficient, extend its service life, and provide better overall performance. With our routine maintenance services, our experts at All Cool Heat Plumbing & General Contractor Inc will check the heating elements on electric water heaters, clean the burners on gas models, test the ignition system, inspect the flue, and inspect the heat exchanger. We will also flush the heat exchanger to keep the system operating correctly.

Tankless water heater repairs: If you have a problem with the heating elements, burners, ignition system, or other components of your tankless water heater, our team at All Cool Heat Plumbing & General Contractor Inc can help. We offer comprehensive tankless water heater repairs and work on all common brands and models.

Tankless water heater installation and replacement: Whether installing a new water heater or upgrading from an older model, our professional plumbers can help you select the best tankless water heater for your home, and we can provide a professional, accurate installation.

Contact us online or call 407-461-461-0301 to learn more about our water heater services!

Why Choose Us for Your Orlando Water Heater Needs?

The team of our technician provides four promises with every water heater job we do:

The job is convenient for you! Plumbing problems are already inconvenient — you don’t need to work with a problematic plumbing company, too. We make our scheduling work for you.

We perform background checks! We drug test and perform background checks before hiring.

We offer stress-free plumbing services! At All Cool Heat Plumbing & General Contractor Inc, we do the job right the first time. We even offer a worry-free guarantee at no cost.

There will be no surprises! Worried that the job is going to take a few hours? Don’t stress — we price by the job, not by the hour.

Schedule Tankless Water Heater Services in Orlando, FL

You need the best service for your tankless water heater. That service comes from All Cool Heat Plumbing & General Contractor Inc. You can trust our team to provide exceptional service for every job we perform. Don’t forget to schedule maintenance to reduce wear and tear on your tankless water heater, and consider joining our Ultimate Advantage Service’s agreement to make that maintenance easier.

Effective and expert service for your water heater in Orlando, FL, is just a phone call away. Call us at +1 407-461-0301 or contact us online at: www.certifiedquality.org to schedule tankless water heater services today!

How Tankless Water Heater work.

How do tankless water heaters create instant hot water?

Inside a tankless water heater, super-powerful gas burners or electrical elements heat the water quickly as it runs through the unit. There is no need to heat and store the water, and the only waiting you’ll do is for the water to move from the heater to the faucet you are using.

Which tankless water heater size is best?

Tankless water heaters are sized based on the number of showers they can handle at one time. If you tend to have more than one person taking a shower at once, get the two-shower size. Otherwise, a one-shower size is often sufficient.

All Cool Heat Plumbing & General Contractor Inc

(407)461-0301

E-mail: allcoolheatplumbingcgc@gmail.com

www.certifiedquality.org

Air Conditioning Change out

A/C Change-outs

AC change outs are not DIY / do-it-yourself projects. Among the many factors to consider are the size of the unit vs. the amount of space it needs to cool, the need to pull permits and determining if it is necessary to also upgrade the duct system. All Cool Heat Plumbing & General Contractor Inc takes care of the entire process for you.

We begin with diagnostic testing of your structure and existing air conditioning unit plus duct system. The average HVAC system has a lifespan of around 15 years. If properly maintained, air conditioners tend to need to be replaced between every 10 – 15 years. Premature failure is most often caused by lack of routine maintenance. This will cause the unit to run inefficiently which means it has to work too hard to cool your space. Regular maintenance includes changing out the air filters, monitoring refrigerant lines, cleaning the condenser coils and ductwork, and other maintenance items that will insure the system runs efficiently and effectively.

Orlando HVAC companies

This aging air conditioner was in need of replacing so the owner called in All Cool Heat Plumbing & General Contractor Inc )+1 407-461-0301

We replaced with a high energy-efficient unit to complete the A.C. change-out fast and under budget.

Air Conditioning

Waiting for your air conditioning unit to reach the end of its life cycle is not always the best timing for an upgrade. Every year, new technologies emerge such as refined energy efficiency methods or new technologies altogether that increase the efficiency of HVAC systems. Many older HVAC systems fail to meet today’s Energy Star standards. The newer heating and air conditioner systems are much more efficient than older units and offer significant long-term energy savings. The federal government’s latest SEER guidelines (Seasonal Energy Efficiency Rating) require cooling units should have a SEER rating of at least 14 starting in 2006. A twenty-year unit may have a SEER2

Replacing the AC unit by itself may not reduce costs as needed. An energy audit from All Cool Heat Plumbing & General Contractor Inc can reveal air leaking windows and door seals, faulty duct work and inadequate HVAC to pair with the new unit. It does no good to change out your air conditioning condenser if you have under-performing ducts and let cool air leak through the windows and doors. Faulty ductwork can account for up to 30 percent energy loss.

Air Conditioning replacement

As the Orlando Florida (Contractors State License Board) states, “Florida 2008 Building Energy Efficiency Standards indicate that HVAC ducts should leak less than 5 percent but, according to Florida Energy Commission statistics, the average duct system leaks about 30 percent, wasting energy and increasing utility bills.” At All Cool Heat Plumbing & General Contractor we test your Home Ducts to ensure there are not mayor air Leaks

Many duct systems are poorly insulated and leak conditioned air into unconditioned attics and crawl spaces. When ducts leak, conditioned air can be forced out unsealed joints and lost. In addition, unconditioned air may be drawn into return ducts through unsealed joints. Attic temperature can be very high in the summer so any attic air that enters your system through unsealed duct joints will have to be cooled. This increases the load on your system and increases your energy bill.

When it becomes necessary to do an A.C. change-out, replacing the old unit with a new energy efficient one will also mean the two units are of a different size. This requires a new Condensate pad and to be anchor according to Florida building Code to be fitted for the replacement unit. All Cool Heat Plumbing & General Contractor Inc we install an exacting requirements Condensate pad plus get paint the outside tubing insulation of the installation. i We do not “cutting corners” here we always complaint with The Building Code of Florida State and do not failed inspection, improper Installation increased utility bills overworking and prematurely aging your brand new HVAC system.

Commercial curb adapter Installation

Another view of the HVAC curb adapter Installation for Commercial Air Conditioning

Custom roof curb adapter ready for rooftop installation

Custom roof curb adapter installed on site

You might assume that your older home or office is going to be much more expensive to upgrade your air conditioning system. Not necessarily… Surprisingly, an older home may have a much better designed duct system than a new home and may only need a leak check and insulation upgrade. Newer homes, on the other hand, may be-victim of cost cutting measures and poorly designed duct systems. The use of flex duct has grown in popularity because ease of installation and the high cost of shop made sheet metal ducts. Flex ducts — even when installed properly — are a poor substitute for well-designed properly insulated sheet metal ducts. It is common practice to make plenums and coil boxes out of taped-together duct board.

Another reason to consider an A.C. changeout is your indoor air quality. While your air conditioning unit is cooling your home or office, it is also filtering the air, providing ventilation, monitoring and adjusting humity to comfortable levels and assisting in the removal of allergens and harmful pollutants from the air.

Newer air conditioning systems are capable of establishing zones throughout a living or work space that result in more moderate and consistent temperatures throughout the space versus the “hot” and “cold” areas that older systems typically deliver. Zoning your home or office is a smart energy-efficient solution worth considering.

Another advantage of newer systems is Smart Device Integration that improves energy efficiency. Make sure your new system will work with smart devices; smart thermostats, for example, connect through your home’s WiFi. You’ll be able to monitor and control temperature settings from our smartphone even when you are away.

When hiring a Bakersfield air conditioning company to replace your air conditioner with a new and improved system, look beyond cost to the overall reputation of the contractor, verify their licensing with the DBPR and weigh their track record for completing similar jobs. Upgrading your air conditioning unit is a good option for lowering your utility bills. Let’s face it, the cost of energy is not going down… So a viable cost savings solution is calling an experienced Orange County - Seminole County - Marion County contractor like All Cool Heat Plumbing & General Contractor Inc in North Florida - Central Florida and South Florida Call us at 407-461-0301 to complete your A.C. change-out.

Reverse Osmosis

Reverse Osmosis in APOPKA Florida

Reverse osmosis systems in APOPKA Florida remove up to 97% of heavy metals, organics, and pesticides that are common in Apopka water. Your food will taste richer, you’ll spend less on bottled water, and – most importantly – your family will be safer!

At All Cool Heat Plumbing & General Contractor Inc , all of our reverse osmosis systems provide between 18 and 50 gallons daily. Installations also include a chrome reach faucet.

Reverse osmosis is a process through which water passes through progressively finer membranes that remove contaminants. This process is actually used at many different scales, including filtering seawater for industrial purposes.

On a residential scale, the membranes used in reverse osmosis often contain holes as small as one micron — more than 100 times finer than a strand of hair! This is what makes reverse osmosis so effective at removing contaminants.

WHAT IS THE ADVANTAGE OF HAVING RO SYSTEMS IN APOPKA FLORIDA

A reverse osmosis system in APOPKA is essential due to the region’s highly-contaminated water supply. A good RO system will provide crystal clear drinking water that not only looks better, but is also healthier for you.

When buying a reverse osmosis system in APOPKA , you want to be certain that you work with a dealer that is known for quality products and service, in addition to offering fair prices. American Home Water has you covered on both fronts!

WHAT DOES REVERSE OSMOSIS REMOVE?

Reverse osmosis removes most of the contaminants that plague American drinking water. That includes:

protozoa

bacteria like E. coli

viruses like norovirus

heavy metals (including lead and arsenic)

natural salts

fluoride

HOW MUCH WATER DOES REVERSE OSMOSIS WASTE?

The reverse osmosis process can use between two and four gallons of water for every one gallon it produces. This sounds worse than it actually is, though. The alternative to using a reverse osmosis filter is to use bottled water, the manufacture of which actually does far more damage to the environment than filtration.

From a cost standpoint, tap water is also quite affordable. The added cost of reverse osmosis water will be negligible.

HOW DO YOU REMINERALIZE WATER AFTER REVERSE OSMOSIS?

Remineralizing your water is not essential as many people mistakenly believe. Human beings get most of their supply of these minerals through their diet and not their water intake. If you prefer the taste of mineralized water, you can add an alkalization stage to your water chain with ease. This comes in the form of an attachment resembling a filter, only it contains minerals that dissolve into your water as it passes through the filter.

THE RANGEHOOD INSTALLATION NEAR YOU

PROCESS

There are numerous rangehood makes and models available and it is often difficult to know which one to purchase. But follow these steps and you won't go wrong.

1. CALL US - RANGEHOODS (407)461-0301

Call us during your kitchen renovation or new build, preferably in the beginning so we can help with any potential installation issues you may have such as the location of the ducting, the position of the kitchen extractor fan, the size you may require and the type of cooking you do.

2. QUOTE AND MEASURE

We will happily come to your site or home to measure and quote. There are many different types of rangehood installations options depending on your home and kitchen style:

1. Soffit Vent Option – the rangehood is ducted to the soffit/eaves of the house.

2. Wall Vent option – the rangehood is ducted through an external wall of the house – this includes Brick and Weatherboard etc.

3. Roof Vent Option – the rangehood is ducted through the roof – this includes masonry and iron etc

3. RANGEHOOD PURCHASE

There are many options when purchasing your new rangehood. We install all brands/models of Rangehoods either supplied by yourself or we can source when necessary.

Our rangehoods installation have been designed and developed using our knowledge and experience selecting high quality materials and current contemporary designs.

4. RANGEHOOD INSTALLATION

Ideally, when building new, there are two installation dates – preline and fitoff. Preline is prior to the gib board being fitted, so we can run the rangehood ducting whilst there is easy access. The second date, the fitoff, is where we will install the rangehood unit after the Kitchen cabinetry is installed and connect it to the pre installed Rangehood ducting.

However, we know this is not always the case with renovations etc. If you are replacing an original Rangehood, or if this is your first Rangehood - We are able to complete a full installation on the day with our smart installation systems

All Cool Heat Plumbing & General Contractor Inc. work within your building timeframes if required – we offer an efficient and reliable installation service. We provide all the accessories you may need for the complete range hood installation to ensure it is working at its optimum just as the manufacturer intended.

Our installers are trained with our smart Rangehood Installation techniques to guarantee a seamless installation from start to finish. They hold a current Health and Safety Policy along with a public liability policy to ensure you are in safe hands.

CALL US NOW 407-461-0301