Here's a step-by-step guide on the toilet replacement process:
# Preparation
1. *Shut off the water supply*: Locate the shut-off valve behind the toilet and turn it clockwise to shut off the water supply to the toilet.
2. *Drain the tank and bowl*: Flush the toilet to drain the tank and bowl.
3. *Disconnect the water supply line*: Use a wrench to loosen the nut holding the water supply line to the toilet. Once loose, you should be able to remove the line from the toilet.
# Removing the Old Toilet
1. *Disconnect the drain line*: Use a wrench to loosen the nut holding the drain line to the toilet. Be prepared for any remaining water to spill out.
2. *Remove the toilet from the floor*: Use a wrench to loosen the nuts holding the toilet to the floor. You may need to rock the toilet back and forth to break the seal.
3. *Carefully lift the toilet*: Use a dolly or lift the toilet with a friend's help to remove it from the bathroom.
# Installing the New Toilet
1. *Inspect and clean the flange*: Inspect the flange (the rubber gasket that seals the toilet to the floor) for any damage or mineral buildup. Clean or replace the flange as needed.
2. *Install the new toilet*: Place the new toilet over the flange, ensuring it's centered and secure.
3. *Tighten the toilet to the floor*: Use a wrench to tighten the nuts holding the toilet to the floor. Be careful not to overtighten.
4. *Reconnect the drain line*: Place the drain line over the toilet's drain outlet and secure it with the nut. Tighten the nut by hand, then use a wrench to tighten an additional 1-2 turns.
5. *Reconnect the water supply line*: Place the water supply line over the toilet's inlet and secure it with the nut. Tighten the nut by hand, then use a wrench to tighten an additional 1-2 turns.
# Final Touches
1. *Turn on the water supply*: Turn the shut-off valve counterclockwise to restore water supply to the toilet.
2. *Test the toilet*: Flush the toilet several times to test for leaks and proper function.
3. *Secure the toilet seat and lid*: Install the toilet seat and lid, ensuring they're securely fastened.
Remember to always follow local plumbing codes and regulations, and consider hiring a professional if you're not comfortable with the installation process.
Local Plumber
All Cool Heat Plumbing & General Contractor
We are locate at Apopka Florida and will be able to get any plumbing issue at your home or business taken care same Day we work with your schedule and ours prices are base on the Plumbing market of your City.
